This is a simple but useful post on removing nails from pallet boards. I used a small pallet and made it into my jig Next step is to place you board with the nails on the jig, nail side up. As you can see I have the nails in the middle of the jig. […]
This was one of my first DYI projects, so I didn’t really keep track of my cuts or detailed pictures.
2×4’S Supplies Cut List
7 Long 2×4’s at 72 inches for the seat
6 Short 2×4’s for the legs.
The wonderful thing is that you can make it as wide or as narrow a bench as you want.
For full Instructions go to the link below.