MERRY CHRISTMAS !!
Pallet Christmas Tree Grove
This was a fun project to do. I found the inspiration on Pintrest of course. There is such a variety of ways to do this, I chose to do the easiest.
Find your pallet, good or bad looking ones Get your circular saw , a straight edge. The straight edge can be a straight piece of wood or metal.
You just need it as a guide to mark out your cut. These don’t have to be perfect.
After removing the sides of the pallet and the back, you have your Christmas tree. 🙂 Now you can make as many as you want and different sizes.
I painted mine Christmas green and red. I used a white spray to make little snow on the tree.
I used 1×4 scrap to make stakes, to pound into the ground so i could anchor the trees. And simply screw the 1×4 into the side of the pallet .
Run your lights, add what ever you want and presto your own unique Christmas display for your home. I just used some extra lights we had so i didn’t get to fancy with my first display.